Car Wash Foamer: Features of Operation, Self-Assembly Tips
Currently, car washing rarely does without the use of a foam generator. Such a convenient device allows you to quickly clean the vehicle in a contactless way. Let's take a look at how to make a foam generator for washing with your own hands, and also take a look at the advantages of professional equipment.
Principle of operation
The foam generator for washing performs several useful functions at the same time: it converts cleaning compositions into dense foam and ensures its uniform distribution over the surfaces.
The process of washing a vehicle using devices of this category suggests the following. A jet of water passes through a specialized automobile shampoo under pressure, which leads to the formation of a thick foam.Due to the treatment of the foaming tablet with liquid, the desired density of the substance is achieved for high-quality cleaning of surfaces. The use of a long hose makes it possible to reach the most distant places.
Most of the low-cost foam generators operate at relatively low pressure. It is much more efficient to use a professional-class device for high-quality car cleaning. The foam generator for washing "Kärcher", as well as other productive units, create a dense, concentrated mass, which saves time when processing large areas. The compactness of the cells in the formed foam has a direct effect on the adhesion to the dirt.
Applying a professional foam generator for washing, you can do the job better. The main advantage of such units is the economical consumption of cleaning composition.
Foam generator for washing their own hands is difficult to do?
Today, due to the availability of a wide range of tools and materials, it is not at all necessary to spend money on the purchase of an expensive car cleaning unit.With certain skills, craftsmen are able to personally cope with the task of producing a sufficiently efficient foam generator.
To do the job you will need the following tools:
Standard equipment includes a pistol for supplying water under pressure, the foam generator itself, as well as a special washing spear.
Works on assembly of the unit are carried out in several consecutive stages:
- A plastic pipe is selected with a cross section of the order of one centimeter and approximately half a meter long. The internal space is filled with foam rubber, sponge or polyethylene sponge.
- A plug of one of the pipe ends is performed with a tee, where a crane is subsequently connected to connect the foam converter.
- A tap is placed on the free end of the pipe, which serves to supply compressed air from the automotive compressor.
- With the help of the union, the other end of the pipe is connected to the hose. To exclude the advancement of the filler through the pipe and blocking the device, a strainer is installed in front of the choke, which can be any part of the grid with large cells.
How much density the tool will produce a home-made foam generator for washing depends largely on the length of the pipe used and the density of its internal filling. At the same time as a container for the content of the cleaning liquid, you can use any container that can withstand the pressure produced by the automotive compressor.
Thanks to the use of the foam generator, the quality of cleaning the car is much higher compared to traditional methods of washing. After all, the substance formed under air pressure penetrates into the most hard-to-reach places. With regular cleaning and meticulous care, even a home-made foam generator can serve for several years, not to mention professional units.