Glosslerene sterilizer for manicure instruments: description, instructions for use, reviews
In our time it is very important to maintain personal hygiene. Especially when it comes to manicure. A pleasant beauty procedure can elevate the mood and self-esteem of both women and men. In addition to receiving the beauty, customers should be safe, which is guaranteed by careful processing of working tools.
Neglecting the sterilization of manicure equipment can have terrible consequences for customers in the form of nail plate fungus, skin diseases, and this is at best, and at worst - tuberculosis, hepatitis, HIV infection.
To avoid such terrible consequences, it is worth initially to think about a reliable decontamination procedure. Today such a question can very easily be resolved.glossper tool sterilizer. This device is especially relevant for manicure masters who carry out the procedure at home.
Description and principle of operation
The glossper sterilizer externally is a metal container with a lid (plastic is allowed). Inside is a special container in the form of a glass of heat-resistant material. Glasperlen balls (glass beads) are poured into this glass.
How does glasspe sterilizer work? It's simple. Around the glass are spiral heaters that transmit the desired temperature to the glass filler. The device is capable of heating balls to a high temperature - 250 degrees. Thus, when the filler is heated, a high pressure is created. Inside have the tools and leave them for some time. The hot balls, touching the surface of the instruments, kill the pathogenic organisms, thereby carrying out the sterilization procedure.
As with any other apparatus, as well as with a glass-glass sterilizer, there are instructions for use. It is very simple, but requires strict adherence.
Before sterilization, the instruments must be treated with a disinfected solution (water with "Alaminol") and allowed to dry. Do not allow moisture to enter the apparatus, as this will lead to its unsuitability and damage to the filler.
30 minutes prior to the start of treatment, it is necessary to turn on glass-sterilizer so that it reaches the desired temperature (within 15 minutes). The device has an LED light bulb. If it is green, it means that the heating process is still underway.
Then take the dry instruments that require sterilization, and placed inside a heat-resistant flask with a filler. Devices should be lowered in the open state (cuticle tweezers and scissors). Here it is very important that there is a contact between the cutting surfaces and the balls. Also avoid contact of tools with the walls and bottom of the heat-resistant container.
The residence time varies according to the size of the nail accessories. If the tools are small, then under high temperature pressure, 15 seconds will be enough to destroy pathogens. If the equipment is large, you should wait 25 seconds.The maximum processing time for instruments in a glassperlin sterilizer can reach 30 seconds. Do not overdo manicure devices, as this may cause damage to them.
When the necessary amount of time has passed, you should get the tools and start working immediately.
It is best to carry out the processing of the instruments before starting work, since the procedure in the glass sterilizer is not designed for the long-term preservation of the sterility obtained.
The device must be stored in a dry place at room temperature, insulated from heat sources.
Glass balls with long-term operation fail, losing its thermal conductivity. Depending on the frequency of use, the old filler should be replaced with a new one.
How often to change the balls?
In a glass sterilizer, before starting the procedure it is necessary to check the suitability of the filler. This can be understood by the shade of the balls. If they become muddy or have acquired gray, yellow, white shades, then you need to immediately replace.
To change, you will need directly new packaging with gersperlenom.On the unit will take about 1.5 packs of filler. Throwing out the old balls, you need to pour new glass into a metal container for 2/3 of the pieces.
Glass balls have a total lifetime of 1 year (regardless of the activity of the application).
But it is recommended to carry out a change of monthly glister if the device is used daily and several hours a day.
If the load of the glassperic sterilizer is average, then it will be enough to replace it once every six months.
And in order to prolong the service life of a heat-resistant substance, it is enough to rinse the balls with a solution of soda every 2 months (or monthly). Then rinse with clean water and allow them to dry, and then fall back into a metal bowl.
Pros and cons of the device
If we consider the advantages of the glass sterilizer, then the most important ones should be noted:
- the time of the disinfection procedure (the device is superior to other sterilization methods, since the processing time is calculated in literally seconds, which allows you to quickly disinfect any metal instrument);
- safety of the blades of manicure instruments (the principle of the sterilizer does not lead to oxidation, deformation and corrosion of the metal);
- dimensions of the device: compactness, mobility and low energy consumption.
But it is also worth considering the opposite side. The disadvantages are as follows:
- small capacity (small space that allows processing of tools of certain sizes);
- the monotony of processing (due to the high temperature it is allowed to process only metal accessories);
- partial sterilization (only the working part of the instrument is lowered into the filler, the handle is left without processing).
The price of glass sterilizer varies from 1,000 to 8,000 rubles. It all depends on the brand and brand of the device. When choosing is worth focusing on the extent of the provision of manicure services.
The cost of glass filler starts from 200 rubles per 500 grams. The price of heat-resistant balls depends on the manufacturer and can reach up to 1000 rubles.
It is best to purchase sterilizer and filler in specialized stores in order to avoid low-quality products.
Reviews of glassperic sterilizer
The device has a positive reputation. Many masters note ease of use. The main advantage is the time of disinfection.Previously, we had to soak the tools in the solutions for 30-40 minutes, which affected the customer turnover.
With glasperlenov sterilizer processing time is reduced several times, but not at the expense of the quality of sterilization of manicure instruments.